Location: Kingdom of Saudi Arabia, Jeddah

Key Responsibilities:

• Conduct direct optical and physical sampling audits on assembled boards to verify that all visual and structural quality metrics meet IPC-A-610 & IPC-A-620 standards.
• Conduct random checks on Surface Mount Technology (SMT) lines to ensure correct component types, polarity, and orientation.
• Perform random checks on manual through-hole component placement, hand soldering quality, and mechanical chassis assembly.
• Perform physical and technical verification on the First Article fully assembled board of each batch against the Bill of Materials (BOM) before mass production begins.
• Verify that oven thermal profiles are set correctly and audit solder joints for process defects such as cold solder, bridging, or tombstoning.
• Audit and verify compliance with the Control Plan, ensuring no assembly operations run on unverified or unreleased lines.
• Ensure that all preventive maintenance schedules are executed, machine cleanliness is maintained, and all active assembly equipment is properly calibrated.
• Conduct daily audits on cleanroom cleanliness, SMT line hygiene, machine tooling/nozzle maintenance, and strict adherence to Electrostatic Discharge (ESD) protective protocols.
• Analyse Statistical Process Control (SPC) charts on critical equipment metrics, including solder paste thickness (SPI data) and component placement accuracy.
• Monitor daily assembly line scrap and rework rates, identify the root causes of components failing mid-process, and report findings to the engineering team.
• Manage line validation by pausing assembly lines temporarily if process limits are exceeded, securing the line until quality compliance is fully restored.
• Ensure that manpower is well-trained regarding process compliance, machine operations, and product quality inspection standards.
• Track and ensure that all approved corrective and preventive actions (CAPA) are fully implemented on the assembly line.

• Bachelor’s degree in engineering, Electronics, Industrial Engineering, Quality, or related field.
• Minimum 10 years of experience in PCBA Manufacturing.
• Experience in SMT, THT, HLA, Box Build Assembly and wire harness.
• Strong understanding of process quality control and manufacturing standards.
• Experience in SPC, CAPA, and Root Cause Analysis.
• Ability to read BOMs, assembly drawings, and production documentation.
• Strong analytical and troubleshooting skills.
• Good communication and reporting skills.

• Knowledge of IPC-A-610 and IPC-A-620 standards.
• Experience monitoring Yield, Rework, and Scrap Reduction projects and lean manufacturing.
• Knowledge of ESD Control and Cleanroom Practices.
• Experience with Process Validation and First Article Inspection.
• Familiarity with FMEA, MSA, 8D, and Lean Manufacturing tools.
• Six Sigma Green Belt is preferred.
• Experience supporting customer audits and corrective action programs

Location: Kingdom of Saudi Arabia, Jeddah

Key Responsibilities:

• Ensure achievement of daily, weekly, and monthly production targets.
• Monitor and improve production efficiency, throughput, and equipment utilization.
• Drive continuous improvement initiatives to improve productivity and reduce manufacturing losses.
• Collaborate with Process Engineering, Quality, Maintenance, Planning, and Supply Chain teams.
• Manage production manpower, shift activities, and workforce development.
• Ensure compliance with safety, quality, and operational procedures.
• Review production KPIs and implement corrective actions.
• Lead yield improvement and scrap reduction programs.
• Support customer and management escalation activities.
• Develop and maintain production standards and operating procedures.
• Participate in capacity planning and future manufacturing expansion projects.
• Lead daily production meetings and operational reviews.
• Ensure adherence to IPC and customer requirements.

• Bachelor’s degree in engineering, Manufacturing, Industrial Engineering, Mechanical Engineering, or related field.
• Minimum 10 years of manufacturing experience.
• Minimum 5 years in a leadership role within PCB manufacturing.
• Strong knowledge of PCB manufacturing processes.
• Experience in production planning and shop floor management.
• Proven experience leading large production teams.
• Strong analytical and decision-making skills.
• Knowledge of Quality Management Systems.
• Proficiency in Microsoft office tools.
• Excellent communication and leadership capabilities.

• Excellent communication and leadership capabilities.
• Strong knowledge of PCB manufacturing processes (ML, DS, Rigid, Rigid flex and flex)
• Proven experience in improving Yield, OEE.
• Strong KPI management and performance monitoring skills.
• Experience leading Operational Excellence and Continuous Improvement initiatives.
• Knowledge of IPC-A-600 and IPC-6012 standards.
• Demonstrated success in cost reduction and productivity improvement projects.
• Experiences in kaizen, 5S and Lean Manufacturing and/or Six Sigma certification is preferred.
• Strong leadership, communication, and problem-solving skills.

Location: Kingdom of Saudi Arabia, Jeddah

Key Responsibilities:

• Detailed FAI inspection according to inspection standards and customer documentation.
• Ensuring the implementation of control plans across all production lines.
• Final PCB inspection according to inspection standards and customer documentation.
• Inspection of PCBs during production according to inspection standards and customer documentation.
• Completion of transactions at Epicor.
• Issuance of Certificate of Conformity (COC).
• Issuance of Non-Conformity Reports (NCRs) during manufacturing processes or in response to customer complaints.
• Issuance of Deviation Reports during manufacturing processes.
• Monitoring of NCR and Deviation Report procedures and ensuring their implementation.
• Leading problem investigations using: 8D Report, 5 Whys Analysis, Fishbone Diagram, Root Cause Analysis (RCA). Identifying the root causes of defects.
• Verifying the effectiveness of corrective and preventive actions (CAPA).
• Support the team for the Micro-section analysis
• Monthly recording of Key Performance Indicators (KPIs).
• Create or update standard laboratory operating procedures (SOPs).
• Review and maintain the calibration tracker
• Supporting customer requirements and audits.
• Ensuring compliance with ISO 9001 and IPC standards and customer requests.
• Improving quality procedures and policies.
• Fostering a culture of continuous improvement within the factory.
• Monitoring critical processes such as lamination, drilling, plating, etching, solder masking, surface finishing, routing, and profiling.
• Ensuring compliance with appropriate IPC standards.
• Reviewing inspection and test results periodically.

• Bachelor’s degree in engineering, Quality Engineering, Manufacturing Engineering, Materials Engineering, or related discipline.
• Minimum 10 years of PCB manufacturing quality experience.
• Strong understanding of quality systems and continuous improvement methodologies.
• Experience leading Root Cause Analysis investigations.
• Knowledge of Quality Management Systems.
• Strong analytical and reporting skills.
• Excellent communication and stakeholder management abilities.
• Proficiency in Microsoft office tools
• Independent, good communication and team work orientated person.

• Strong knowledge of PCB manufacturing processes (ML, DS, Rigid, Rigid flex and flex)
• Proven experience in improving Yield, OEE.
• Strong KPI management and performance monitoring skills.
• Experience with QMS, SPC, FMEA, DOE ,8D and CAPA Excellence and Continuous Improvement initiatives.
• Knowledge of ISO90001 quality audit, Statistic tool Minitab, Control Plan, IPC-A-600, IPC-6012 and IPC-7721 standards.
• Lean Manufacturing and/or Six Sigma certification is preferred.
• Experience supporting customer quality audits and corrective action closure.

Location: Kingdom of Saudi Arabia, Jeddah

Key Responsibilities:

• Lead and optimize Dry Process operations including (Drilling, routing, Imaging, SM, Legend, AOI and electrical test)
• Monitor process capability, yield performance, and defect trends.
• Conduct root cause analysis (RCA) and implement corrective and preventive actions (CAPA).
• Develop and maintain process parameters, work instructions, and control plans.
• Drive continuous improvement initiatives to reduce defects and improve throughput.
• Support production teams in troubleshooting process-related issues.
• Analyse process and quality data to identify improvement opportunities.
• Participate in new product introduction (NPI) activities and qualification trials.
• Collaborate with Quality, Production, Maintenance, and Engineering teams.
• Lead process audits and ensure compliance with company standards.

• Bachelor’s degree in engineering, Manufacturing, Industrial Engineering, Mechanical Engineering, or related field.
• Minimum 10 years of manufacturing experience.
• Strong knowledge of PCB manufacturing processes.
• Strong analytical and decision-making skills.
• Knowledge of Quality Management Systems.
• Proficiency in Microsoft office tools
• Excellent communication and leadership capabilities.

• Excellent communication and leadership capabilities.
• Strong knowledge of PCB manufacturing processes (ML, DS, Rigid, Rigid flex and flex) and Dry Process technologies.
• Experience in RCA methodologies such as 5 Why, Fishbone ,8D and CAPA
• Experience in Control Plan and Statistic tool such as Minitab.
• Proven experience in improving Yield, and SPC.
• Strong KPI management and performance monitoring skills.
• Experience leading Operational Excellence and Continuous Improvement initiatives.
• Knowledge of IPC-A-600 and IPC-6012 standards.
• Demonstrated success in cost reduction and productivity improvement projects.
• Lean Manufacturing and/or Six Sigma certification is preferred.
• Strong leadership, communication, and problem-solving skills.

Location: Kingdom of Saudi Arabia, Jeddah

Key Responsibilities:

• Lead and optimize Dry Process operations including (PTH, PPL, SES and DES, all Pretreatment or cleaning process and all Surface finish technology ENIG, HASL and Etc.
• Monitor process capability, yield performance, and defect trends.
• Conduct root cause analysis (RCA) and implement corrective and preventive actions (CAPA).
• Develop and maintain process parameters, work instructions, and control plans.
• Drive continuous improvement initiatives to reduce defects and improve throughput.
• Support production teams in troubleshooting process-related issues.
• Analyse process and quality data to identify improvement opportunities.
• Participate in new product introduction (NPI) activities and qualification trials.
• Collaborate with Quality, Production, Maintenance, and Engineering teams.
• Lead process audits and ensure compliance with company standards.

• Bachelor’s degree in engineering, Manufacturing, Industrial Engineering, Mechanical Engineering, or related field.
• Minimum 10 years of PCB manufacturing experience.
• Strong knowledge of PCB manufacturing processes.
• Experience managing Chemical Qualification and Process Validation activities.
• Strong analytical and decision-making skills.
• Knowledge of Quality Management Systems.
• Proficiency in Microsoft office tools
• Excellent communication and leadership capabilities.

• Excellent communication and leadership capabilities.
• Strong knowledge of PCB manufacturing processes (ML, DS, Rigid, Rigid flex and flex) and Dry Process technologies.
• Knowledge of DOE (Design of Experiments).
• Experience in RCA methodologies such as 5 Why, Fishbone ,8D and CAPA.
• Experience in Control Plan and Statistic tool such as Minitab.
• Proven experience in improving Yield, and SPC.
• Strong KPI management and performance monitoring skills.
• Experience leading Operational Excellence and Continuous Improvement initiatives.
• Knowledge of IPC-A-600 and IPC-6012 standards.
• Demonstrated success in cost reduction and productivity improvement projects.
• Lean Manufacturing and/or Six Sigma certification is preferred.
• Strong in communication, and problem-solving skills.